Vertical





4AM TradingVertical





4AM TradingVertical





Horizontal Balancing Machines

VTB 15 M

Download PDF

Download PDF

https://4amtrading.com/wp-content/uploads/2021/10/vtm15m.jpg
Dynamic balancing machine for tools
Designed to meet the specific balancing needs of tools and tool holders for high speed operating machines.
  Hard bearing vertical axis balancing machine.
  Measurement of static unbalance on one plane and dynamic unbalance on two planes.
  Possibility to select different programs for correction.

V 50/100 TFM

https://4amtrading.com/wp-content/uploads/2021/10/v-50-100-tfm.jpg
Balancing machine with manual drilling – milling unit
Balancing machine equipped with milling/drilling unit able to balance rotors by a making drills vertically or at an angle or by contour milling.
The cutter spindle is controlled manually for the milling feed.
A rotary table allows milling tangential slots for correction of the unbalances.
gearbox for variable speed
8 speeds from 75 to 2100 rpm (std)
motor power rating 0.7/1.1 kW
spindle with Morse taper n°4 (optional ISO 30)
vertical spindle stroke 160 mm
vertical head stroke 460 mm
horizontal head travel 660 mm with manual control (optional with axis drive motor)
drilling capacity in steel 30 mm
tilting of milling head about the vertical 45 degrees
max. driving torque on the spindle for milling feed 30 N.m

V 50/100 UFA

https://4amtrading.com/wp-content/uploads/2021/10/v-50-100-ufa.jpg
Balancing machine with automatic drilling machine with controlled axis
The unit is mounted on two slides with recirculating ball feed screws: a vertical slide with stroke 250 mm and a horizontal one with stroke 300 mm; both slides are controlled by motors with absolute encoders.
Drilling unit allows drilling holes in steel up to a diameter of 20 mm.
Standard spindle toolholder is with ISO40 taper (DIN 2079).
The drill bit speed can be programmed from 300 to 2000 rpm. Spindle torque 18 Nm.
Max. drilling capacity in steel 20 mm
Tool taper ISO40
Spindle three-phase motor 3Kw – 4 poles with inverter

V 50/100 UF-P

https://4amtrading.com/wp-content/uploads/2021/10/v-50-100-ufp.jpg
Balancing machine with pneumatic axis drilling machine
Balancing machine with automatic unbalance correction equipped with an electro-pneumatic unit set up vertically. The unit is adjusted to the correct position through two manual slides both with a stroke of 300 mm.
A linear encoder, integral to the unit, allows to make holes with controlled depth and strictly necessary for balancing, thus ensuring to obtain the highest balancing accuracy possible.
The measuring and correction cycle is fully automatic.
Max. drilling capacity in steel 18 mm
Compressed air supply pressure 6 Kg/cm²
Total spindle stroke (rapid + slow) 125 mm
Tool taper ISO30
Max. thrust force 310 kg
Motor power rating: 0.55 – 2,2 Kw

V 500

https://4amtrading.com/wp-content/uploads/2021/10/v500.jpg
Balancing machine for large size rotors
Balancing machine for large size rotors or rotors with high windage effects, on one or two planes
4AM Trading values

Finding the
best solutions.Engineer

Uniquely enable accurate supply chains rather than frictionless technology. Globally network focused materials vis-a-vis cost effective manufactured products & service for Oil & Gas Industry state of the art customer service.
Gasketing and sealing
Fasteners and Piping
Filters and Cartridges
Belts & Pulleys
Machine Tools & Industrial
https://4amtrading.com/wp-content/uploads/2020/11/img-employees-talking-2.png
https://4amtrading.com/wp-content/uploads/2020/11/img-red-skew-1.png
Why 4AM Trading ?

4AM Trading always gets the job done regardless of the volume and size of the project.

Distinctively re-engineer revolutionary product provider to Saudi Aramco and helping thousands of companies to bid to their premium customers. Intrinsically incubate intuitive opportunities and real-time potentialities.
https://4amtrading.com/wp-content/uploads/2020/11/img-career-1.png
https://4amtrading.com/wp-content/uploads/2020/11/img-red-skew-1.png